Home
Disclaimer
Contact
RV Aircraft Construction Website
Toggle navigation
Home
My RV-12iS
My RV-9A
RV How-to Videos
RV Tools
RV Videos
RV Resources
Aviation Events
Places to Fly
How I Did Stuff
Pop-Rivet Dimpler 101
My Wing Jig
My Wing Cradle
Wing Cradle Mod
Tilting Tank Jig
Delrin Aileron Stops
Nutplate Preparation
Fiberglass 101
Save Your Skin!
Bolt Holder!
Social Media
Facebook
YouTube
Patreon
Good Information!
Fix a Heavy Wing
Nut & Bolt Torque Values
How to Land and RV
RV Info on Facebook!
Van's Aircraft Builders Page
Van's Aircraft Builders Group
Van's Aircraft Builders
Shoot Video From Your Airplane!
Flight Training
RV-12iS Construction Log:
The Project
-
Empennage/Tailcone
-
RV Eye Candy
-
Preparation
1st Things First
-
Getting Ready
-
Pop-riveting
-
Compressors
RV-12iS Tools & Techniques
-
Drilling
-
Dimpling and Countersinking
-
Tools
-
Riveting
RV-12iS: Rudder - 2/6/2020
Home
Previous Entry
Next Entry
Back
Share on:
Started work on the Rudder
Cut out the Spar Caps for the Spar.
>
Final Drilled the Hinge Brackets
Next, I'll separate them.
Separated the Hinge Brackets
These will be riveted to the Main Spar of the Rudder.
Smoothed the edges of the Hinge Brackets
This scotch-brite wheel is now on it's 2nd RV Aircraft!
Smoothed the edges of the rudder main spar
Now ready for attaching the spar caps and hinge brackets.
Positioned the Spar Caps
The Hinge Brackets will go on top of these.
Holes drilled!
Ready for deburring.
Time to fit the rudder horn
It will be riveted to the rudder spar.
Final drilled the Rudder Horn to spar
Ready for riveting!
Clecoed the spar caps and hinge bracket into place
Now for the ribs!
Trail fit of the rudder spar to the vertical stabilizer
I used a tie wire to fish it in to place.
A handy tool for holding tiny washer in tight places
These are available at Aircraft Spruce.
Home
Previous Entry
Next Entry
Back
SmittysRV.com is an Amazon Associate