RV Aircraft Construction Website

RV-9A: Preparation - 4/26/2004
Home  Previous Entry  Next Entry  Back
 
Share on:
Bought pneumatic drill from Home DepotBought pneumatic drill from Home Depot
I got this drill from Home Depot for less than $50, BUT the instructions recommended that I have an in-line filter to catch dust particles and drain water, an in-line oil lubricator and a regulator. I will make quick connects for each item so I can take it apart easily. When I get ready to spray paint, I will remove the in-line oil lubricator as recommended by paint sprayer instructions. All of the in-line systems and connections cost $127. I am starting to refer to HD as "Second Home Depot". Amazon also sells a nice 3/8-Inch Reversible Pneumatic Drill.
Mounted the air filter, regulator and oil lubricatorMounted the air filter, regulator and oil lubricator
After reading the instructions from the pneumatic drill, I learned that the air hose that feeds this setup needs to come up from the compressor and then down to the air filter, regulator and oil lubricator. This prevents oil from going back into the compressor. Also they recommend that the oil lubricator be mounted higher that the pneumatic tool in use. The oil lubricator has a clear "oil drip" located at the top of unit, so you can see how drips are going into the air hose to the pneumatic tool when in use. You can adjust the flow, but they don't tell how much is "too much". Notice I have a quick connects on each unit. When I get ready to spray paint, the oil lubricator will be removed and I will use a dedicated "clean" hose. UPDATE:The oil lubricator is not really needed. If you're like me, you want to lubricate your pneumatic tool yourself as you use it. On my next RV (arr-arr), I'm not going to put the in-line water drain in either. However multiple in-line air control gauges (regulators) are a must.
Added a T adaptor and another air regulator. Added a T adaptor and another air regulator.
Jacking with pressure when switching from the drill to the rivet gun is a real pain in the butt. I added a "T" adapter and a second air regulator. This allows two hoses to be going, one set at 40 lbs for the rivet gun, and the other set at 90 lbs for the drill. All found at your friendly neighborhood Home Depot.
Home  Previous Entry  Next Entry  Back

SmittysRV.com is an Amazon Associate
SmittysRV.com is an Amazon Associate
HOMEBUILT, EXPERIMENTAL AND KITBUILT INSURANCE
gopro camera mounts for aircraft
gopro camera mounts for aircraft
Rod Machado Free Pilot Training Course Syllabus
RV Metal Aircraft Tools
Rod Machado Pilot Training
Rod Machado Pilot Training