|
Share on:
|
|
|
Making the T-915 anti-rotation bracket
I found the material in the “9 Wing Sub-kit #8” zip lock bag. The part itself is not marked as instructed (“AA6-125x1x1”). But it was pretty easy to determine that this is part using the process of elimination. The bracket has to be 1 inch in width. The part I pulled from the bag is exactly 2 inches in width, so I cut it in half with my band saw. I had to go really slow. That dude got hot in a flash. After cutting out the part, I used my fancy drill bit in the drill press to make the hole for the fuel tube. It cuts holes in stages, one size at a time. Then I drilled one of the rivet holes in the back of the bracket.
|
|
