|
Share on:
|
|
|
Here's my Smitty clamp
I scratched my head for quite a while trying to figure out how to "clamp", as the instructions say, the horizontal stabilizer to the work bench top. All I need is something to just to gently hold the horizontal stabilizer down so it won't flip off the bench after the elevators are mounted. So I grabbed a piece of 3/8 inch plywood and put a 6 inch bolt through the middle of it and drilled a hole in the work bench top and put a nut on the underside. It's not tight at all, just enough to keep the the horizontal stabilizer from moving too much.
|
|
